HIGH BAY STA 200W IP65 IKO8 , die-casting aluminum black RAL 9005
Installation mode: hook mount or bracket mount
Input voltage AC90-305V PF0.95
Dimension D336x102mm
Net weight 3.00Kg
Power 150W luminous flux 140lm/W-175lm/W or 190lm/W
Beam angle 90 degrees, 120 degrees
Dimmable 3 in 1 dimming(PWM, 1-10V, Resistor)
CCT 4000K-5000K-5700K
Led type Philips lumileds, bridgelux
CRI 80
IP65
IK08
Remote controler as an option
Microwave as an option
HIGH BAY STA 200W IP65 IKO8
Nelux Safety notes:
* Carefully read and follow all warnings and instructions before installing or servicing the luminaire.
* The installation should be done by an individual familiar with the construction and operation of the luminaire.
* The installation of this luminaire must by in accordance with national and local building and electrical codes.
* The product must not be damaged or operated in a damaged condition.
* The luminaire must be directly wired on line. Any ballast or other power device previously used with the replaced luminaire must be
removed.
* Between the luminaire and any possibly flammable material must be an appropriate safety space (at least 20 cm).
* The luminaire must be covered with heat insulating materials.
* Always provide proper ventilation around the luminaire and do not exceed the maximum ambient temperature.
* Compared to traditional lights the characteristic light distribution of this luminaire may differ. In order to be sure to meet your lighting requirements a photometric check of the installation is recommended.
Warning:
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.